Description
The APEX SM-10RE is a forged wheel from APEX’s Enduro Line, engineered specifically for Porsche applications utilizing the 5×130 bolt pattern with 71.6mm center bore. This 19×9 ET48 wheel addresses the performance demands of Porsche enthusiasts who require both strength and reduced unsprung weight for improved handling dynamics. The forged construction approach delivers superior material density and structural integrity compared to cast alternatives.
The SM-10RE achieves a weight of 21.2 lbs in the 19×9 configuration, representing a significant reduction in rotational mass that directly impacts acceleration, braking performance, and suspension response. This weight optimization is accomplished through the forged manufacturing process, which allows for precise material placement and thinner spoke sections without compromising structural strength required for high-performance Porsche applications.
Forged construction utilizes a single piece of aluminum that is heated and formed under extreme pressure, creating a wheel with enhanced grain structure and material properties. This manufacturing method produces wheels that are both lighter and stronger than cast equivalents, making them suitable for high-performance driving applications where wheel failure is not acceptable. The forged process eliminates the porosity and inconsistencies found in cast wheels, resulting in a denser, more reliable structure capable of withstanding the demands of track use and spirited driving.
The SM-10RE features Profile 1 face design and utilizes R14 Ball Seat hardware configuration for proper installation and wheel-to-hub interface. The wheel is engineered for primary Porsche vehicle applications and is available in Anthracite and Satin Black finishes to complement various vehicle aesthetics.
- Compatibility: Porsche (5×130 bolt pattern)
- Construction: Forged
- Weight: 21.2 lbs
- Face Profile: Profile 1
- Hardware Seat: R14 Ball Seat
- Available Finishes: Anthracite, Satin Black
- SKU: SM10RE199ET48-5130-716-AN
Wheel Specifications:
| DIAMETER | WIDTH | OFFSET | BOLT PATTERN | CENTER BORE | CONSTRUCTION | FACE PROFILE | HARDWARE SEAT | WEIGHT |
| 19″ | 9.0″ | ET48 | 5x130mm | 71.6mm | Forged | Profile 1 | R14 Ball Seat | 21.2 lbs |






Reviews
There are no reviews yet.